Unseen footage of the capsizing of a tug boat that killed two crew members off the coast of Greenock has been released.
The Biter sank on February 24, 2023, while assisting the passenger vessel Hebridean Princess as it approached James Watt Dock.
The two crew members aboard the tug died after the boat capsized “within ten seconds”.
The bodies of George Taft, 65, from Greenock, and Ian Catterson, 73, from Millport, were removed from the water almost 24 hours after the boat sank in the Firth of Clyde.
SuppliedFacebookAn investigation by the Marine Accidents Investigation Branch (MAIB) in 2024 found that the incident happened after a “breakdown of systems” that should have kept Mr Catterson and Mr Taft safe.
Fourteen issues were found to have contributed to the accident, including the speed of the cruise ship, which almost certainly caused an “essential” safety rope to break.
The report on the incident that found an open hatch on the tug boat “compromised” its watertight integrity and “limited the crew’s chance of survival”.
Now, the MAIB has published a safety video at the request of industry to promote the key safety issues identified during their investigation to those involved in ship assist towage operations.
@Gordo2k6/TwitterSafety recommendations have been made for the vessel’s master, marine pilot and the tug crew to have a detailed understanding of the plan for the employment of the tugs
To remember that a small increase in speed can result in a large increase in the force acting on the towlines, escalating the risk of something going wrong, and to ensure that the tug’s gob rope is correctly rigged
The recommendation also advised keeping the tug’s doors and hatches closed during towing operations.
A recommendation has been issued to the UK Chamber of Shipping, UK Harbour Masters’ Association, the UK Maritime Pilots’ Association, the British Tugowners Association, British Ports Association and The Workboat Association.
Investigation finds several safety issues
Marine Accident Investigation BranchMAIB added that the marine pilot’s training had not prepared them to work with conventional tugs like the Biter.
It was found that the speed of the Hebridean Princess placed an excessive load on the MV Biter’s gob rope – the rigging that keeps a tugboat from capsizing – causing it to break.
It was also highlighted that the cruise ship’s master and tug masters did not have a “shared understanding” of the Clydeport pilot’s plan and couldn’t challenge his intentions.
It said it was unclear whether anyone understood the “extreme risks” associated with the MV Biter’s manoeuvre behind the cruise ship.
The MAIB added that the tug’s rapid capsize meant the crew had insufficient time to release its towlines.
Andrew Moll OBE, chief inspector of marine accidents, said the incident was a “cruel lesson” in how quickly things can go wrong.
“In less than ten seconds, the tug capsized, and two experienced seafarers lost their lives because of a breakdown of the systems that should have kept them safe,” he said.
Mr Moll added that small tugboats are an “essential” part of UK port operations but said the vulnerabilities of the vessels “must be understood by those that operate and control them”.
“Harbour authorities, ship and tug masters, and pilots should collectively own this risk,” he said.
“Pilots and tug crews must be suitably trained and experienced for their roles, and they must share a detailed understanding of the towage plan before they start the job.”
He continued: “Speed, which has an exponential effect on towing forces, must be carefully controlled and the lines correctly set.
“Everyone involved must then monitor the execution of the plan and, if needed, act to keep everyone safe.”
Follow STV News on WhatsApp
Scan the QR code on your mobile device for all the latest news from around the country
























